Supported Receivers

The following receivers are supported in Wavetool:
  • Beyerdynamic TG1000 (firmware 2.03.18 or newer)
  • Lectrosonics Venue2
  • Lectrosonics DSQD
  • Sennheiser G3 (firmware 1.7 or newer)
  • Sennheiser G4 -Series
  • Sennheiser EM2050 series (firmware 1.7 or newer)
  • Sennheiser EM3732-II
  • Sennheiser EM6000
  • Sennheiser EM9046 (firmware 4.0.0 or newer)
  • Sennheiser EM3532 - For more information, see Legacy Receivers (below)
  • Sennheiser EM1046 - For more information, see Legacy Receivers (below)
  • Sennheiser EW-DX
  • Shure Axient Analog
  • Shure Axient Digital (Auto-discovery supported)
  • Shure SLX-D (Auto-discovery supported)
  • Shure UHF-R
  • Shure ULX-D (Auto-discovery supported)
  • Sony DWR-R02DN
  • Sony DWR-R03D
  • Sound Devices A10 RACK w/ A10-RX with A10-TX & A20-Mini, Wisycom MCR42 or Lectrosonics SRc More info (PDF 168KB)
  • Wisycom MRK16 with MCR54
  • Wisycom MRK950 and MRK960
  • Wisycom MRK980 (firmware 1.7 or newer)

Legacy Receivers

Supported features for EM-3532 connected with RS485:
  • RF data
  • Battery data
  • Change the EM3532 ID number
  • Monitor up to five receivers linked over one serial port.

EM3532 Wavetool Instruction (PDF 202KB)

The driver needed for the Brainboxes/SerialComm USB-Serial adapter won`t work out of the box with MacOS 10.14. or later. If you are planning to use EM3532s with Wavetool, please contact us first at [email protected] for more instructions.

Supported features for EM1046 connected with Brainboxes ES-320 Ethernet – RS422 Serial Adapter:
  • RF data
  • Battery data

EM1046 Wavetool Instruction (PDF 576KB)

Note: Set the audio input to NONE when using Sennheiser EM3532 & EM1046. Wavetool will show the receiver audio level.