Getting Started
Networking
Device Properties and Settings
For some Shure devices, you can update parameters in the Wireless Workbench properties panel and those changes will immediately be live on the device.
Planning a Show
Frequency Coordination and Calculation
Monitoring Channels and Devices
ShowLink control and 2.4 GHz Spectrum
Interference Management
Wireless Workbench can detect and manage interference for AD4D, AD4Q, and some ADX5D receivers.
Scan Library
The Shure scan library is an online database of RF scans from users around the world.
Update Wireless Workbench

Configure Network Settings on the Hardware

Devices are set by default to Automatic or DHCP mode, which is the recommended mode. This lets a DHCP server set device IP addresses. If no DHCP server is present, the devices will use their default IP addresses. You can also manually define an IP address or subnet mask for a device.

Note: Network instructions for other Shure^® models can be found in the hardware guides.